Polarized Reversing Current Relay

Next > >

Send Inquiry

Product Code : РВ 10 -11

Product Description

Electromagnetic relay

Polarized reversing high frequency direct current relay with one circuit-closing contact, non-hermetically sealed bistable two-position relay. It is applied to switch electric signals with frequency to 30MHz.

Relay max mass 17g.

Technical specifications SI0.456.000 ТU.

Minimum term of service: 25 years.

Technical data and operating factors

Power supply voltage : According to the table.1.
Switching modes : According to the table.2.
Contacts resistance : ≤0.2 Оhm max
Action time: max 15мmsec
Release time: max15 msec

Insulation resistance:

200 Mohm - under average climatic conditions;
50 Mohm - at max temperature;
20 Mohm - at high humidity;

Insulation strength:

3.5kV eff.- under average climatic conditions;
2.1kVeff. - at high humidity;
Vibration stability: From 5 tо 39 Hz with amplitude up to 1 mm; from above 40 to 500 Hz with acceleration to 59 m/s2 (6g ).
Impact resistance: to 40 g.
Environmental temperature : From223К (-50^oС) to 343К (+70^oС).
Relative humidity: To 98% at 313К ( +40^oС )
Air pressure: From 1.07, 104 Pаto 6, 104 Pа

MAIN ELECTRICAL DATA

Design

Operating voltage, V

Action and release voltage, V

Coil resistance, Оhm

SI4.562.010

SI4.562.011

12.6 + 1.4^{- 4}

27 + 3^{- 6}

2 - 8

4 - 18

24 + 2

90 + 5

SWITCHING MODE

Passed signal frequency MHz	Value of a passed signal, max		Switching frequency HZ, Max	Number of switching cycles. max
Passed signal frequency MHz	voltage, kV (eff.)	Current A	Switching frequency HZ, Max	at aver. Temp.	also at 353К (+70^oС)
1.5 6 15 30	1.4 1.3 1.2 1.0	6 6 5 2.5	2	10⁵	5.10^-4