Non-hermetically Sealed Direct Current Electromagnetic Relay

Neutral electromagnetic relay

Non-hermetically sealed direct current electromagnetic relay with one circuit changeover contacts.

It is applied to switch double current electric circuits. It switches current up to 5·10-6Аto 1 А.

• Relay max mass 6 g.
• Technical specifications РС0.456.011 ТU.
• Minimum term of service: 25 years.

Technical data and operating factors :

• Power supply voltage:according to the table.1.
• Switching modes:according to the table.2.
• Contacts resistance:≤0.5 Оhm
• Action time: max 1.5мmsec
• Release time: max2.3 msec
• Insulation resistance: between conducting circuits and body frame:
• 500 Mohm - under average climatic conditions;
• 200 Mohm - at max temperature;
• Between coil and body frame;
• 5 Mohm - at high humidity
• Between contacts, between contacts and coil:
• 5 Mohm - at high humidity
• Insulation strength: between conducting circuits and body frame; between contacts and coil:
• 500 V eff.- under average climatic conditions;
• 200 Veff. - at low air pressure;
• 200 V eff. - at high humidity;
• Vibration stability:
• from 5 50 Hz with amplitude to 2.5 mm;
• from above 50 to 3000 Hz with acceleration to 245 m/s2 (25g );
• Impact resistance: up to 75g ..
• Environmental temperature:from213К (-60°Ð¡) to 373К (+100°Ð¡).
• Relative humidity:up to 98% at 308К ( +35°Ð¡ )
• Air pressure: from 6.66 Pа (5mm of mercury.) to 266600 Pа (1600 mm of mercury)

MAIN ELECTRICAL DATA